Fedus LAN Network Cable Tester For RJ11, RJ12 and RJ45 with LED Indicators Lan Adapter(1000 Mbps)

Description

Keep your network running smoothly by testing cables to uncover problematic shorts, open wires, crossed pairs, broken connections, or other wiring mishaps. This tester is the inexpensive alternative to having to hire an electrician to fix networking issues in your home or at the office.Having trouble with internet connectivity? Maybe it’s the cables! When your connection is spotty, it’s quick and easy to spot-check the Ethernet cables in your home or office for breaks in connection.This tester is designed to handle twisted pair, straight, and Cat5/Cat5e/Cat6/UTP cables with RJ-11 or RJ-45 connectors to test for breaks or signal loss in your internet or LAN connection. Easy-to-read LED indicator lights to alert you to possible gaps in your signal transfer through each line, testing to make sure your internet is getting where it needs to go or if you need to replace or repair faulty Ethernet cords.Powerful SimplicityPop a 9-Volt battery in and you’re ready to test the connection to any room in your home or office! You can set the box-shaped output end of the tester to send a slow or fast signal through the Ethernet cable you are testing while the handle-shaped end connects to the opposite end of the cable to see if the same signal is being received. This tester is not limited by proximity, so you can test connections even if the opposite end of the cable is in a room 200 feet away.Features:Switch on the power on the main tester. Remotely test cable up to 1000 ft in length (remote kit included) Cable Tester for RJ11, RJ45, 10/100 Base-T and telephone cable … etcIt can easily clarify cable, continuity, open and short. Verifying Cable continuity, open, short and cross wire pair up to 1000ft with the remote kit. Specifications: Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-2-3-4-5-6-7-8-G —-RJ45 1-2-3-4-5-6 ————RJ12 2-3-4-5——————RJ11Following are abnormal connections: If one cable, for example, cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on. If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on. If two ends of a cable are disordered, for example, NO. 2and NO. 4, then displays on: If two cables are short-circuited, neither of the corresponding lights is on of the remote tester while the main tester remains unchanged.If three cables, including three, are short-circuited, none of the corresponding lights is on. If test patch panels or wall plate outlets, two cables which can match each other (RJ45) will be connected to the tester. If test cables of the same axes, BNC turns on when the cable works. Test of the RJ45 RJ11 Cat-5 Cat-6 cable: if all the cables work, the lights will become green from NO.1&2 to NO.7&8 sequently. if any light is not on or turns on unsequently, the cables are broken. Power: 9V battery (Included)Size: approx. 105*102*27mm(L*W*H) Net weight: 113g