Advance ADPC300 Portable Room Air Purifier(White)

Description

“FUNCTION & FEATURES Indicators 1) LED DISPLAY When the user sets humidity, it shows the humidity the user sets. When the user sets time, it shows the hours that user sets When press the TIMER button for 5 seconds, it shows the room temperature (degree Celsius) 2) ROOM TEMPERATURE INDICATOR When press the TIMER button for 5 seconds, the LED display shows the room temperature. This indicator will turn on. 3) WATER TANK FULL INDICATOR When the water tank is full, this indicator will turn on. It remind of the user to empty the water tank. 4) HUMIDITY INDICATOR When set a humidity, this indicator turns on. When the machine shows the room humidity, this indicator also turns on. 5) HIGH FAN SPEED INDICATOR When the machine is power on, the fan will start with high speed. This indicator turns on. 6) LOW FAN SPEED INDICATOR When the machine is power on, the fan will start with high speed. Then press SPEED button, the fan speed will be low speed. The noise at this time will be very small. 7) CHILDREN LOCK INDICATOR When the machine is power on, press the SPEED button for 3 seconds, the machine will enter into the children lock model. The children lock indicator will turn on.In this situation, all other buttons and indicators will turn off. To cancel the children lock model, again press the SPEED button for 3 seconds. SUNNY DAY MODE INDICATOR When the machine enters into sunny day mode, this indicator turns on. When the machine enters into other mode, this indicator turns off. RAINY DAY MODE INDICATOR When the machine enters into rainy day mode, this indicator turns on. When the machine enters into other mode, this indicator turns off. CLOTHES DRY MODE INDICATOR When the machine enters into clothes dry mode, this indicator turns on. When the machine enters into other mode, this indicator turns off. For how to set SUNNY DAY MODE, RAINY DAY MODE, and CLOTHES DRY MODE, please see following button explanation. Buttons POWER BUTTON Press this button, the unit starts, The default mode is s sunny mode ,high fan speed. Press this button again, the machine stops. HUMIDITY SET BUTTON Press this button to set the humidity. The user can set the humidity with a 5%RH increase or decrease. FAN SPEED BUTTON Press this button to adjust the fan speed. When the machine is power on, the fan speed is low speed. When the user press this button again, the fan speed becomes high speed. TIMER BUTTON Press this button can set 0-24 hours working time. When the user sets the time, the display will show the timer the user sets. when the setting timer is 00,it means to cancel the timer function. MODE BUTTON Sunny day mode, rainy day mode , dry cloth mode , the three modes switch between each other once press the button. sunny day mode : default humidity is 60%, can set humidity rainy day mode : default humidity is 40%, can set humidity dry cloth mode : default humidity is 20%, can not set humidity Water Drainage Water level float:- Do not remove the float from the water tank; otherwise, the machine will not stop to work when the water tank is full. Then the water will be overflow that maybe makes damage to your floor. Put the water tank back:- When put the water tank back to the unit, please use two hands to push the water tank into the machine to the correct position. Or the water full indication will still show red and the machine cannot work. Clean the water tank :- If the water tank is dirty, clean by cool water or warm water, cannot use cleaner, steel wool, chemical rag duster, gas oil, benzene, thinner or other solvent to clean it, otherwise, it would damage the water tank and lead to leakage Continuous drainage 1. Open the cover on the back of the dehumidifier. 2. Take out the water tank 3. Insert a PVC pipe with 11mm?inner diameter 11mm? Never block the water outlet or the pipe, water will flow into the water tank if it is blocked. Never bend the drainage pipe and be always slower than the outlet. Must close the cover when no need continuous drainage. “